Barco R9842987 input card specification:
Analog/digital converter: 2 x analog device AD9888
Scaler: the scaler algorithm in FPGA is used for 1:1 or scaling
CPU- / frame memory: 64MB SDRAM
Input: up to SXGA 1280× 1024@75hz/input
Pixel clock 20 MHz -- 135 MHz/input
Line frequency 15 kHz -- 115 kHz/input
Hsync+Vsync, Csync, green sync
Sync level 1 V -- 5 V/TTL
Color: 15 BPP / 32K, 16 BPP / 64K, 24 BPP / 16M
Internal frame rate: the maximum frame rate when the internal color depth is 16 BPP and 24 BPP
Input timing: double input mode
(other combinations can be used when considering pixel clock and line frequency requirements) : and textmode @70hz
1280x1024@60hz 2 x 30Hz, 16 BPP 2 × 20Hz, 24bpp
2 x 1280x1024@60hz 2 x 30Hz, 16 BPP 2 x 20Hz, 24 BPP
2 x 1280x1024@75hz 2 x 37Hz, 16 BPP 2 x 25Hz, 24 BPP
Bus: PCI bus, 32 bit / 33 MHz, 64 bit / 66 MHz
Power supply: 5 V(±2%), 3.3 V(± 0.3v), -12 V(±10%)
Power consumption: 5 V / 1.5a, 3.3v / 1.6a, -12 V / 100 mA
Working conditions: 0.. 50° C, humidity 8%-80%, non-condensation
Dimensions: PCI full-length card, 312.00mm x 121.92mm
Weight: 425 g
Connector: 1 x 64 bit, 3, 3/5 V PCI edge connector
2 x 15 pin SubMinD HD connector, VGA compatible
Prices are listed on this site for search engine optimization only, not for any reference.
